[bird] Use bird instead of quagga

plays/firewall.yml

@@ -38,19 +38,21 @@
   roles:
     - firewall
 
-# Deploy BGP server configuration on IPv4 routers
+# Deploy BGP server configuration on routers
 - hosts: crans_routeurs
   vars:
-    zebra:
-      password: "{{ vault_zebra_password }}"
     bgp:
       as: 204515
-      router_id_v4: 158.255.113.73
-      network_v4: 185.230.76.0/22
-      neighbor_v4: 158.255.113.72
-      router_id_v6: 138.231.136.200
-      network_v6: 2a0c:700::/32
-      neighbor_v6: 2001:1b48:2:103::bb:1
       remote_as: 8218
+      ipv4:
+        router_id: 158.255.113.73
+        bind_address: 158.255.113.73
+        network: 185.230.76.0/22
+        neighbor: 158.255.113.72
+      ipv6:
+        router_id: 185.230.79.62
+        bind_address: 2001:1b48:2:103::bb:2
+        network: 2a0c:700::/32
+        neighbor: 2001:1b48:2:103::bb:1
   roles:
-    - quagga
+    - bird

roles/bird/tasks/main.yml

@@ -0,0 +1,25 @@
+---
+- name: Install BIRD
+  apt:
+    update_cache: true
+    name:
+      - bird
+  register: apt_result
+  retries: 3
+  until: apt_result is succeeded
+
+- name: Deploy bird configuration
+  template:
+    src: bird/bird.conf.j2
+    dest: /etc/bird/bird.conf
+    mode: 0640
+    owner: bird
+    group: bird
+
+- name: Deploy bird6 configuration
+  template:
+    src: bird/bird6.conf.j2
+    dest: /etc/bird/bird6.conf
+    mode: 0640
+    owner: bird
+    group: bird

roles/bird/templates/bird/bird.conf.j2

@@ -0,0 +1,45 @@
+{{ ansible_header | comment }}
+
+# This is a minimal configuration file, which allows the bird daemon to start
+# but will not cause anything else to happen.
+#
+# Please refer to the documentation in the bird-doc package or BIRD User's
+# Guide on http://bird.network.cz/ for more information on configuring BIRD and
+# adding routing protocols.
+
+# Change this into your BIRD router ID. It's a world-wide unique identification
+# of your router, usually one of router's IPv4 addresses.
+router id {{ bgp.ipv4.router_id }};
+
+listen bgp address {{ bgp.ipv4.bind_address }} port 179;
+
+# The Kernel protocol is not a real routing protocol. Instead of communicating
+# with other routers in the network, it performs synchronization of BIRD's
+# routing tables with the OS kernel.
+protocol kernel {
+	persist;
+	scan time 60;
+	import none;
+	export all;   # Actually insert routes into the kernel routing table
+}
+
+# The Device protocol is not a real routing protocol. It doesn't generate any
+# routes and it only serves as a module for getting information about network
+# interfaces from the kernel. 
+protocol device {
+	scan time 60;
+}
+
+protocol static {
+	route {{ bgp.ipv4.network }} reject;
+}
+
+protocol bgp zayo {
+	local as {{ bgp.as }};
+	neighbor {{ bgp.ipv4.neighbor }} as {{ bgp.remote_as }};
+	import all;
+	export filter {
+		if ( net ~ [ {{ bgp.ipv4.network }} ] ) then accept;
+		reject;
+	};
+}

roles/bird/templates/bird/bird6.conf.j2

@@ -0,0 +1,45 @@
+{{ ansible_header | comment }}
+
+# This is a minimal configuration file, which allows the bird daemon to start
+# but will not cause anything else to happen.
+#
+# Please refer to the documentation in the bird-doc package or BIRD User's
+# Guide on http://bird.network.cz/ for more information on configuring BIRD and
+# adding routing protocols.
+
+# Change this into your BIRD router ID. It's a world-wide unique identification
+# of your router, usually one of router's IPv6 addresses.
+router id {{ bgp.ipv6.router_id }};
+
+listen bgp address {{ bgp.ipv6.bind_address }} port 179;
+
+# The Kernel protocol is not a real routing protocol. Instead of communicating
+# with other routers in the network, it performs synchronization of BIRD's
+# routing tables with the OS kernel.
+protocol kernel {
+	persist;
+	scan time 60;
+	import none;
+	export all;   # Actually insert routes into the kernel routing table
+}
+
+# The Device protocol is not a real routing protocol. It doesn't generate any
+# routes and it only serves as a module for getting information about network
+# interfaces from the kernel. 
+protocol device {
+	scan time 60;
+}
+
+protocol static {
+	route {{ bgp.ipv6.network }} reject;
+}
+
+protocol bgp zayo {
+	local as {{ bgp.as }};
+	neighbor {{ bgp.ipv6.neighbor }} as {{ bgp.remote_as }};
+	import all;
+	export filter {
+		if ( net ~ [ {{ bgp.ipv6.network }} ] ) then accept;
+		reject;
+	};
+}

roles/quagga/tasks/main.yml

@@ -1,49 +0,0 @@
----
-- name: Install quagga
-  apt:
-    update_cache: true
-    name:
-      - quagga
-  register: apt_result
-  retries: 3
-  until: apt_result is succeeded
-
-- name: Create quagga log directory
-  file:
-    path: /var/log/quagga
-    state: directory
-    mode: 0755
-    owner: quagga
-    group: quagga
-
-- name: Deploy quagga daemons configuration
-  template:
-    src: quagga/daemons.j2
-    dest: /etc/quagga/daemons
-    mode: 0644
-    owner: root
-    group: root
-
-- name: Deploy quagga debian configuration
-  template:
-    src: quagga/debian.conf.j2
-    dest: /etc/quagga/debian.conf
-    mode: 0640
-    owner: quagga
-    group: quagga
-
-- name: Deploy quagga bgpd configuration
-  template:
-    src: quagga/bgpd.conf.j2
-    dest: /etc/quagga/bgpd.conf
-    mode: 0640
-    owner: quagga
-    group: quagga
-
-- name: Deploy quagga zabra configuration
-  template:
-    src: quagga/zebra.conf.j2
-    dest: /etc/quagga/zebra.conf
-    mode: 0640
-    owner: quagga
-    group: quagga

roles/quagga/templates/quagga/bgpd.conf.j2

@@ -1,16 +0,0 @@
-{{ ansible_header | comment(decoration='! ') }}
-!
-router bgp {{ bgp.as }}
- no synchronization
- bgp router-id {{ bgp.router_id_v4 }}
- network {{ bgp.network_v4 }}
- neighbor {{ bgp.neighbor_v4 }} remote-as {{ bgp.remote_as }}
- neighbor {{ bgp.neighbor_v6 }} remote-as {{ bgp.remote_as }}
-!
- address-family ipv6
- network {{ bgp.network_v6 }}
- neighbor {{ bgp.neighbor_v6 }} activate
- exit-address-family
-!
-log file /var/log/quagga/bgpd.log
-log stdout

roles/quagga/templates/quagga/daemons.j2

@@ -1,28 +0,0 @@
-{{ ansible_header | comment }}
-
-#   2 .. 10  = lower priorities
-# Read /usr/share/doc/quagga/README.Debian for details.
-#
-# Sample configurations for these daemons can be found in
-# /usr/share/doc/quagga/examples/.
-#
-# ATTENTION:
-#
-# When activation a daemon at the first time, a config file, even if it is
-# empty, has to be present *and* be owned by the user and group "quagga", else
-# the daemon will not be started by /etc/init.d/quagga. The permissions should
-# be u=rw,g=r,o=.
-# # When using "vtysh" such a config file is also needed. It should be owned by
-# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
-#
-# The watchquagga daemon is always started. Per default in monitoring-only but
-# that can be changed via /etc/quagga/debian.conf.
-#
-zebra=yes
-bgpd=yes
-ospfd=no
-ospf6d=no
-ripd=no
-ripngd=no
-isisd=no
-babeld=no

roles/quagga/templates/quagga/debian.conf.j2

@@ -1,25 +0,0 @@
-{{ ansible_header | comment }}
-#
-# If this option is set the /etc/init.d/quagga script automatically loads
-# the config via "vtysh -b" when the servers are started.
-# Check /etc/pam.d/quagga if you intend to use "vtysh"!
-#
-vtysh_enable=yes
-zebra_options="  --daemon -A 127.0.0.1"
-bgpd_options="   --daemon -A 127.0.0.1"
-ospfd_options="  --daemon -A 127.0.0.1"
-ospf6d_options=" --daemon -A ::1"
-ripd_options="   --daemon -A 127.0.0.1"
-ripngd_options=" --daemon -A ::1"
-isisd_options="  --daemon -A 127.0.0.1"
-babeld_options=" --daemon -A 127.0.0.1"
-#
-# Please note that watchquagga_options is an array and not a string so that
-# quotes can be used.
-#
-# The list of daemons to watch is automatically generated by the init script
-# from daemons.conf and appended to the watchquagga_options.
-# Example:
-#    watchquagga_options=("-Adz" "-r" '/sbin/service %s restart' -s '/sbin/service %s start'  -k '/sbin/service %s stop')
-watchquagga_enable=yes
-watchquagga_options=(--daemon)

roles/quagga/templates/quagga/zebra.conf.j2

@@ -1,11 +0,0 @@
-{{ ansible_header | comment(decoration='! ') }}
-
-hostname zebra
-password {{ zebra.password }}
-enable password {{ zebra.password }}
-log file /var/log/quagga/zebra.log
-
-
-interface lo
-
-line vty